The company I work for has a few of these Infinera Cloud eXpress DWDM systems, but we knew very little about them, and documentation is really scarce
2025-09-01
1、From the LOADER prompt, boot the recovery image from the USB flash drive:boot_recovery The image is downloaded from the USB flash drive. Execute t
2025-08-11
v3700从服务界面新建系统时，提示： CMMVC8020E: 存在存储集群标识时尝试创建集群 无法创建新系统，是因为以前的集群信息尚未完全清除干净,在机柜配置界面重置集群标识，再次尝试新建系统成功。 如果还是不行，可以尝试[1]里面讲的方法，ssh登录进存储，执行以下命令:
2025-08-08
Objective Reset a switch to the factory default config from the boot rom, as the admin password is unknown. Environment Summit EXOS All All bootr
2025-07-29
The default user and password of ILOM is “root/changeme”, but if you have changed the password already and due for some reason you forgot the password
2025-07-23
I tried the above on the T5220, with no success. However, I was successful using the 'default' login. Once you've set the jumper as described ab
2025-07-23
# Wait until this point in the boot process than hit CTRL+C to interupt and drop into ROMMON mode MBI validation sending request. HIT CTRL-C to ab
2025-07-16
Unable to login to Cisco ASR 9001. Forgot my Login and password for Cisco ASR 9001. Solution: ASR9001 Root Password recovery: Assuming Single
2025-07-16
步骤 1：重新加载 Cisco 8000 并配置 PXE # 重新加载底盘 按ESC键进入BIOS，选择“Boot Manager”，然后选择IPXE
2025-07-07
Here I'm getting the error: unsupported command (Chassis-manager) Edit: I was issuing the wrong version of the command. This did end up working, My p
2025-05-23