LOG 归档 - 第43页共139页

华为交换机 iStack 堆叠配置：成员ID与主备选举

华为交换机 iStack 堆叠实战：成员ID、优先级与堆叠域编号的规划方法，先连线后配置的完整命令步骤，主备选举规则、双主（split）处理与环形拓扑选择建议，以及 display stack 系列验证命令和堆叠端口 Down、成员无法加入等常见故障的排查思路。

admin 2026-09-24

0 0 0

Arista EOS ZTP: DHCP Options and Boot Scripts

Debug and design Arista EOS zero touch provisioning: DHCP option 67, boot scripts, CloudVision bootstrap URLs, plus the failures that stall a new swit

admin 2026-09-24

0 0 0

ArubaOS-CX VSF Stacking: Roles and VSF Links

Configure an ArubaOS-CX VSF stack: member IDs, conductor and standby roles, VSF links, ring topology and manual versus auto-stacking, with verificatio

admin 2026-09-24

0 0 0

Dell OS10 RESTCONF API: Automating Switch Config

Use the Dell SmartFabric OS10 RESTCONF API to read and push YANG-modelled configuration with curl or Python, including auth, verification and common e

admin 2026-09-24

0 0 0

Junos BFD Timers: Liveness Detection That Scales

Set Junos BFD minimum-interval, multiplier and detection-time correctly so failover is fast without flapping. Includes per-protocol examples and scali

admin 2026-09-24

0 0 0

华为交换机 OSPF 配置详解：区域划分与 VLANIF

华为交换机 OSPF 配置实战：三层 VLANIF 接口互通、ospf 进程与 area 划分、ABR 与 ASBR 角色、display ospf 系列验证命令及邻居不起来的排查思路，同时给出接口开销与 DR/BDR 选举调优、区域认证配置和常见故障处理步骤。

admin 2026-09-23

0 0 0

Arista EOS sFlow Configuration and Verification

Configure sFlow on Arista EOS: destination, source-interface, sample rate, polling interval, per-interface enable, egress sampling and show sflow veri

admin 2026-09-23

0 0 0

ArubaOS-CX QoS Trust and Queue Profiles Guide

ArubaOS-CX QoS configuration: qos trust cos or dscp, cos-map and dscp-map, custom queue-profile with map queue, schedule-profile DWRR weights and appl

admin 2026-09-23

0 0 0

Dell OS10 QoS: Trust Maps and Queue Scheduling

Configure Dell SmartFabric OS10 QoS: trust dscp-map and dot1p maps, class-maps, ingress policy-maps, queuing policy with bandwidth percent and strict

admin 2026-09-23

0 0 0

SRX Chassis Cluster Failover: Redundancy Groups

Junos SRX chassis cluster failover explained: redundancy groups, priority, preempt, control and fabric links, manual failover and verification command

admin 2026-09-23

0 0 0