huawei 归档 - 第4页 共7页 - 夜莺博客

标签：huawei

华为交换机忘记 Console 密码？BootROM/BootLoad 清除与恢复完整指南

华为交换机忘记 Console 密码？BootROM/BootLoad 清除与恢复完整指南

华为 S 系列交换机（S1700、S2700、S5700、S6700 等）忘记 Console 口登录密码怎么办？两种方法无需清空业务配置即可恢复访问：方法一通过 STelnet/Telnet 在线修改密码；方法二重启后按 Ctrl+B 进入 BootROM/BootLoad 菜单清除 Consol

admin admin 2026-09-04
0 0 0
Huawei Switch PNP Button Reset: Models and Stack Notes

Huawei Switch PNP Button Reset: Models and Stack Notes

Huawei switch PNP button reset: six-second hold, supported S5700/S5735/S6730 models, what survives, stack caveats and pnp-button disable.

admin admin 2026-09-03
0 0 0
Huawei Switch: saved-configuration vs factory-configuration

Huawei Switch: saved-configuration vs factory-configuration

Huawei reset compared: reset saved-configuration deletes only the startup file, while reset factory-configuration wipes all service configuration and

admin admin 2026-09-03
0 0 0
Huawei H3C Cisco Command Equivalents: VRP and Comware CLI

Huawei H3C Cisco Command Equivalents: VRP and Comware CLI

Cisco IOS vs Huawei VRP vs H3C Comware commands mapped side by side: modes, VLANs, trunks, OSPF, BGP, aggregation, users and file management.

admin admin 2026-09-03
0 0 0
Huawei S7700/S9700: reset saved-configuration Commands

Huawei S7700/S9700: reset saved-configuration Commands

Clear Huawei S7700/S9700 config safely: reset saved-configuration prompts, backup first, reboot answers, per-interface clearing and verification.

admin admin 2026-09-03
0 0 0
华为交换机恢复出厂设置三种方法详解（PNP按钮/一键式/清空配置）

华为交换机恢复出厂设置三种方法详解（PNP按钮/一键式/清空配置）

华为交换机恢复出厂设置的三种官方方法：长按PNP按钮6秒、reset factory-configuration一键恢复、reset saved-configuration清空启动配置，附操作示例、注意事项与恢复后最小配置。（含堆叠注意事项与恢复后的最小配置）

admin admin 2026-09-03
0 0 0
Huawei S5700 Factory Reset Guide: CLI, BootROM and Recovery

Huawei S5700 Factory Reset Guide: CLI, BootROM and Recovery

Step-by-step Huawei switch factory reset guide: back up the configuration, run the reset, verify the wipe, harden the switch and troubleshoot failures

admin admin 2026-09-02
0 0 0
Multi-Vendor CLI Cheat Sheet: Cisco, Juniper, Huawei and Nokia

Multi-Vendor CLI Cheat Sheet: Cisco, Juniper, Huawei and Nokia

Multi-vendor CLI cheat sheet comparing Cisco IOS, Juniper Junos, Huawei VRP and Nokia SR OS: verb mapping, config models, VLANs, OSPF, BGP and ACLs.

admin admin 2026-09-02
0 0 0
Huawei vs H3C CLI Commands: Side-by-Side VRP Reference

Huawei vs H3C CLI Commands: Side-by-Side VRP Reference

Huawei VRP vs H3C Comware CLI side by side: system-view, interface naming, VLAN and trunk verbs, routing protocols, SSH setup and file management.

admin admin 2026-09-02
0 0 0
华为交换机恢复出厂设置三种方法详解（PNP按钮/一键式/清空配置）

华为交换机恢复出厂设置三种方法详解（PNP按钮/一键式/清空配置）

华为交换机恢复出厂设置三种方法详解，并补充带业务在线时的回退准备与风险控制：配置备份的三种粒度、堆叠与 VRRP 场景下的逐台操作顺序、管理面优先恢复策略、重启提示选择的常见陷阱，以及恢复后的再上线验证清单与失败模式分析，覆盖从备份到再上线的全过程。

admin admin 2026-09-02
0 0 0
1 2 3 4 5 6 7