juniper 归档 - 第2页 共10页 - 夜莺博客

标签：juniper

Junos Interface Damping: Suppress Physical Link Flaps

Junos Interface Damping: Suppress Physical Link Flaps

Configure Junos physical interface damping to stop a flapping link flooding routing protocols: penalty 1000, suppress and reuse levels, hold-time guid

admin admin 2026-10-03
0 0 0
BGP Route Flap Damping Parameters Explained

BGP Route Flap Damping Parameters Explained

Understand BGP route flap damping: half-life, reuse, suppress and max-suppress defaults, how the figure-of-merit decays, plus a Junos policy example.

admin admin 2026-10-03
0 0 0
MC-LAG ICCP Backup Liveness Detection Config Guide

MC-LAG ICCP Backup Liveness Detection Config Guide

Configure and verify Junos MC-LAG ICCP backup liveness detection: peer IPs, BFD timers, prefer-status-control-active and LACP system ID behaviour.

admin admin 2026-10-03
0 0 0
ARP Spoofing in the Enterprise: Detection and Prevention

ARP Spoofing in the Enterprise: Detection and Prevention

How ARP spoofing enables man-in-the-middle attacks, how Dynamic ARP Inspection validates ARP against the DHCP snooping database, and how to deploy it.

admin admin 2026-10-02
0 0 0
Loopback Interfaces: Why Every Network Device Needs One

Loopback Interfaces: Why Every Network Device Needs One

Loopback interfaces explained: why a stable /32 address is the identity of a router, how it drives router IDs, BGP and management, and how to plan the

admin admin 2026-10-02
0 0 0
BGP Route Flap Damping and Why RIPE-580 Advises Off

BGP Route Flap Damping and Why RIPE-580 Advises Off

BGP route flap damping: penalty, half-life, reuse and suppress limits, why path hunting makes it harmful, and how RIPE-580 changed best practice.

admin admin 2026-10-02
0 0 0
MC-LAG ICCP Failures: Liveness & LACP System ID

MC-LAG ICCP Failures: Liveness & LACP System ID

A Juniper MC-LAG playbook for ICCP failures: the liveness and ICL matrix, how the LACP system ID changes, and the show commands that prove it.

admin admin 2026-10-02
0 0 0
Junos RPM Probes: SLA Monitoring with Ping, HTTP and UDP

Junos RPM Probes: SLA Monitoring with Ping, HTTP and UDP

Configure Junos RPM probes to measure round-trip time, jitter and packet loss per path, with thresholds, traps and verification commands.

admin admin 2026-10-01
0 0 0
Junos OSPF Adjacency Stuck in ExStart or Exchange

Junos OSPF Adjacency Stuck in ExStart or Exchange

Diagnose Junos OSPF neighbors stuck in ExStart or Exchange: MTU mismatch, firewall filters on lo0, traceoptions commands and the fixes that work.

admin admin 2026-09-30
0 0 0
Junos Zero Touch Provisioning with DHCP Option 43

Junos Zero Touch Provisioning with DHCP Option 43

Automate new Juniper switches with ZTP: DHCP option 43 suboptions, ISC DHCP and Kea examples, per-serial config classes, and boot verification.

admin admin 2026-09-27
0 0 0
1 2 3 4 … 10