mlnx-os 归档 - 夜莺博客

标签：mlnx-os

MLNX-OS Configuration Management: Save, Load, Rollback

MLNX-OS Configuration Management: Save, Load, Rollback

Manage MLNX-OS configurations safely: running vs startup config, saving to flash, backup to a remote host, loading a file and recovering from a bad ch

admin admin 2026-09-21
0 0 0
Lossless RoCE on MLNX-OS: PFC, ECN and DSCP Trust

Lossless RoCE on MLNX-OS: PFC, ECN and DSCP Trust

Configure lossless RoCE on Mellanox MLNX-OS switches: PFC priority mapping, ECN/WRED thresholds, DSCP trust mode and host-side verification.

admin admin 2026-09-21
0 0 0
MLNX-OS MLAG (sx_mlag) Configuration & Verification

MLNX-OS MLAG (sx_mlag) Configuration & Verification

Build MLAG on Mellanox/NVIDIA MLNX-OS switches: IPL port-channel, MLAG VIP and system MAC, mlag peer-address, plus the show commands that prove it is

admin admin 2026-09-19
0 0 0
Cisco Nexus 9000 TCAM Carving and ACL Regions

Cisco Nexus 9000 TCAM Carving and ACL Regions

How Nexus 9000 TCAM carving works, why %ACLQOS out-of-resource errors appear, and which show commands verify ACL regions before you reboot to change t

admin admin 2026-09-17
0 0 0
MLNX-OS CLI Troubleshooting: Filters, watch and Log Commands

MLNX-OS CLI Troubleshooting: Filters, watch and Log Commands

Troubleshoot NVIDIA MLNX-OS switches faster: CLI modes, show filters with include/exclude, watch for live counters, json-print output and logging comm

admin admin 2026-09-08
0 0 0
Mellanox MLNX-OS: VLAN Interfaces and IP Routing Setup

Mellanox MLNX-OS: VLAN Interfaces and IP Routing Setup

Enable Layer 3 on Mellanox MLNX-OS (Onyx) switches: create VLANs, turn on ip routing, assign SVI addresses, add static routes and verify with show com

admin admin 2026-09-07
0 0 0
MLNX-OS CLI Filters, watch and Link Diagnostics Commands

MLNX-OS CLI Filters, watch and Link Diagnostics Commands

Speed up NVIDIA Mellanox MLNX-OS troubleshooting: include and exclude filters, watch, count and json-print output, plus link-diagnostics status codes.

admin admin 2026-09-03
0 0 0
Mellanox Switch Getting Started: First-Time Setup and CLI Basics

Mellanox Switch Getting Started: First-Time Setup and CLI Basics

Mellanox switch first-time setup: console settings, the MLNX-OS wizard, CLI modes, management IP and route, configuration write and interface verifica

admin admin 2026-09-02
0 0 0
NVIDIA MLNX-OS LAG and LACP Configuration Guide

NVIDIA MLNX-OS LAG and LACP Configuration Guide

Configure LAG and LACP on NVIDIA Mellanox MLNX-OS switches: port-channels, member ports, active or passive modes, and verification with show commands.

admin admin 2026-08-30
0 0 0
MLNX-OS Configuration Management: Save, Load, Reset

MLNX-OS Configuration Management: Save, Load, Reset

NVIDIA MLNX-OS configuration management: save with configuration write, switch active config files, restore factory defaults and handle dual managemen

admin admin 2026-08-29
0 0 0
1 2