vpn 归档 - 第2页 共2页 - 夜莺博客

标签：vpn

WireGuard MTU and Handshake Failures: Fix Guide

WireGuard MTU and Handshake Failures: Fix Guide

Diagnose WireGuard tunnels that ping but stall: path MTU maths, PersistentKeepalive for NAT, AllowedIPs mistakes, forwarding, MASQUERADE and verificat

admin admin 2026-09-14
0 0 0
DMVPN Phase 3: NHRP Shortcut and Hub Configuration

DMVPN Phase 3: NHRP Shortcut and Hub Configuration

DMVPN phase 3 explained: how NHRP redirect and NHRP shortcut work together, hub and spoke configuration, routing summarisation, NAT and verification.

admin admin 2026-09-12
0 0 0
IPsec IKEv2 Troubleshooting: SA_INIT and IKE_AUTH Debugs

IPsec IKEv2 Troubleshooting: SA_INIT and IKE_AUTH Debugs

Read IKEv2 debugs like a state machine: which message failed, what NO_PROPOSAL_CHOSEN means, and how to tell a Phase 1 fault from a Phase 2 one.

admin admin 2026-09-11
0 0 0
Cisco ASA Site-to-Site IPsec VPN CLI Configuration

Cisco ASA Site-to-Site IPsec VPN CLI Configuration

Configure a Cisco ASA LAN-to-LAN IPsec VPN on the CLI: IKEv1 policy, transform set, interesting-traffic ACL, tunnel-group, crypto map and NAT exemptio

admin admin 2026-09-09
0 0 0
Palo Alto Site-to-Site IPsec VPN: CLI Configuration

Palo Alto Site-to-Site IPsec VPN: CLI Configuration

Configure a Palo Alto site-to-site IPsec VPN from CLI: crypto profiles, tunnel interface, IKE gateway, auto-key tunnel, static route, NAT and verifica

admin admin 2026-09-09
0 0 0
FortiGate SSL VPN Web Mode: Configuration Guide

FortiGate SSL VPN Web Mode: Configuration Guide

FortiGate SSL VPN web mode step by step: local users and groups, web portal bookmarks, SSL-VPN settings on the WAN interface, and the ssl.root firewal

admin admin 2026-09-07
0 0 0
MikroTik RouterOS 7 IPsec Site-to-Site VPN Setup

MikroTik RouterOS 7 IPsec Site-to-Site VPN Setup

MikroTik RouterOS 7 IPsec site-to-site VPN: IKEv2 profile, peer, identity, proposal and policy, the NAT bypass rule, MSS clamping and verification com

admin admin 2026-09-07
0 0 0
FortiGate Site-to-Site IPsec VPN: Phase 1 and Phase 2 Setup

FortiGate Site-to-Site IPsec VPN: Phase 1 and Phase 2 Setup

Configure a FortiGate site-to-site IPsec VPN: phase 1 (IKE) and phase 2 (IPsec) settings, selectors, NAT-T, DPD, CLI verification and common failure f

admin admin 2026-09-06
0 0 0
WireGuard Site-to-Site VPN: wg0.conf Configuration Example

WireGuard Site-to-Site VPN: wg0.conf Configuration Example

Build a WireGuard site-to-site VPN between two Linux gateways: key generation, wg0.conf [Interface]/[Peer] sections, AllowedIPs routing, MTU and keepa

admin admin 2026-09-06
0 0 0
Juniper SRX Route-Based Site-to-Site IPsec VPN

Juniper SRX Route-Based Site-to-Site IPsec VPN

Configure a route-based site-to-site IPsec VPN on Juniper SRX: IKE and IPsec proposals, the st0 tunnel, security policies, routing and verification.

admin admin 2026-09-04
0 0 0
1 2