LOG 归档 - 第23页共139页

对比华为交换机恢复出厂设置的三种方法：PNP 按键、reset factory-configuration 与 reset saved-configuration，含每种方法清除范围、适用场景、确认与验证命令，避免误删数据文件或恢复后仍加载旧配置。

admin 2026-10-02

0 0 0

Configure VLANs on Arista EOS step by step: create VLANs, assign access and trunk ports, build SVIs and verify the result with show commands.

admin 2026-10-02

0 0 0

ArubaOS-CX access vs trunk ports compared: allowed VLANs, native VLAN tagging, config examples and the show commands that verify the result.

admin 2026-10-02

0 0 0

Reset a Dell PowerSwitch OS10 back to factory defaults and bring the management default gateway back up, with backup, reset and verification steps.

admin 2026-10-02

0 0 0

A Juniper MC-LAG playbook for ICCP failures: the liveness and ICL matrix, how the LACP system ID changes, and the show commands that prove it.

admin 2026-10-02

0 0 0

Configure Huawei NQA test instances (ICMP, TCP, UDP, HTTP) for latency and loss measurement, with thresholds, reaction and verification.

admin 2026-10-01

0 0 0

Configure BFD on Arista EOS: interval and multiplier tuning, BGP and static route integration, session scale, and verification commands.

admin 2026-10-01

0 0 0

Use Aruba NetEdit for multi-device AOS-CX changes: plans, validation policies, conformance checks, deployment and rollback that actually works.

admin 2026-10-01

0 0 0

Enable sFlow on Dell SmartFabric OS10: global and per-interface sampling, collector setup, sizing the sample rate and verifying the data.

admin 2026-10-01

0 0 0

Configure Junos RPM probes to measure round-trip time, jitter and packet loss per path, with thresholds, traps and verification commands.

admin 2026-10-01

0 0 0