dell 归档 - 夜莺博客

标签：dell

Dell OS10 802.1X Port Authentication Configuration

Dell OS10 802.1X Port Authentication Configuration

Enable 802.1X on Dell SmartFabric OS10: global dot1x system-auth-control, RADIUS server setup, per-port control and verification with show dot1x.

admin admin 2026-10-08
0 0 0
Dell OS10 DHCP Relay and Snooping Configuration

Dell OS10 DHCP Relay and Snooping Configuration

Configure DHCP relay with ip helper-address and DHCP snooping on Dell SmartFabric OS10, including trust ports, VLAN scope and the binding table.

admin admin 2026-10-08
0 0 0
Dell OS10 Priority Flow Control and DCB Configuration

Dell OS10 Priority Flow Control and DCB Configuration

Configure Dell OS10 priority flow control and DCBX for lossless RoCE traffic: dcb-map, PFC no-drop priorities, ETS bandwidth, buffer sizing and verifi

admin admin 2026-10-07
0 0 0
Dell OS10 Hardware Health and Optics Diagnostics

Dell OS10 Hardware Health and Optics Diagnostics

Use Dell SmartFabric OS10 show commands to check PSU, fan, temperature and optic health: show environment, show interface transceiver and support bund

admin admin 2026-10-06
0 0 0
Dell OS10 VRF Configuration and Verification Guide

Dell OS10 VRF Configuration and Verification Guide

Configure VRF instances on Dell SmartFabric OS10: interface binding, per-VRF routing, controlled route leaking and the show commands that prove isolat

admin admin 2026-10-05
0 0 0
Dell OS10 Route-Map Configuration: Match, Set and Verify

Dell OS10 Route-Map Configuration: Match, Set and Verify

Build Dell SmartFabric OS10 route-maps for redistribution and BGP filtering, with match/set examples and show route-map verification commands.

admin admin 2026-10-04
0 0 0
Dell OS10 default interface: Reset Ports to Factory Default

Dell OS10 default interface: Reset Ports to Factory Default

How to use the Dell SmartFabric OS10 default interface command to clear port settings, why VLT discovery interfaces block it, and how to verify the re

admin admin 2026-10-03
0 0 0
Dell OS10 Factory Reset & Default Gateway Recovery

Dell OS10 Factory Reset & Default Gateway Recovery

Reset a Dell PowerSwitch OS10 back to factory defaults and bring the management default gateway back up, with backup, reset and verification steps.

admin admin 2026-10-02
0 0 0
Dell SmartFabric OS10 sFlow: Configuration and Analysis

Dell SmartFabric OS10 sFlow: Configuration and Analysis

Enable sFlow on Dell SmartFabric OS10: global and per-interface sampling, collector setup, sizing the sample rate and verifying the data.

admin admin 2026-10-01
0 0 0
Dell OS10 VXLAN BGP EVPN Configuration Guide

Dell OS10 VXLAN BGP EVPN Configuration Guide

Configure VXLAN with BGP EVPN on Dell SmartFabric OS10: VTEP source, virtual networks, auto-EVI, VLT anycast gateway and verification commands.

admin admin 2026-09-30
0 0 0
1 2 3 … 5