os10 归档 - 夜莺博客

标签：os10

Dell OS10 Factory Reset and Default Gateway Configuration

Dell OS10 Factory Reset and Default Gateway Configuration

How to reset a Dell PowerSwitch running OS10 to factory defaults and configure the management default gateway correctly, with CLI steps and checks.

admin admin 2026-10-10
0 0 0
Dell OS10 Storm Control Configuration and Verification

Dell OS10 Storm Control Configuration and Verification

Configure Dell OS10 storm control for broadcast, multicast and unknown unicast with percentage or bps rates, actions and show commands.

admin admin 2026-10-09
0 0 0
Dell OS10 Priority Flow Control and DCB Configuration

Dell OS10 Priority Flow Control and DCB Configuration

Configure Dell OS10 priority flow control and DCBX for lossless RoCE traffic: dcb-map, PFC no-drop priorities, ETS bandwidth, buffer sizing and verifi

admin admin 2026-10-07
0 0 0
Dell OS10 Hardware Health and Optics Diagnostics

Dell OS10 Hardware Health and Optics Diagnostics

Use Dell SmartFabric OS10 show commands to check PSU, fan, temperature and optic health: show environment, show interface transceiver and support bund

admin admin 2026-10-06
0 0 0
Dell OS10 VRF Configuration and Verification Guide

Dell OS10 VRF Configuration and Verification Guide

Configure VRF instances on Dell SmartFabric OS10: interface binding, per-VRF routing, controlled route leaking and the show commands that prove isolat

admin admin 2026-10-05
0 0 0
Dell OS10 Route-Map Configuration: Match, Set and Verify

Dell OS10 Route-Map Configuration: Match, Set and Verify

Build Dell SmartFabric OS10 route-maps for redistribution and BGP filtering, with match/set examples and show route-map verification commands.

admin admin 2026-10-04
0 0 0
Dell OS10 default interface: Reset Ports to Factory Default

Dell OS10 default interface: Reset Ports to Factory Default

How to use the Dell SmartFabric OS10 default interface command to clear port settings, why VLT discovery interfaces block it, and how to verify the re

admin admin 2026-10-03
0 0 0
Dell OS10 Factory Reset & Default Gateway Recovery

Dell OS10 Factory Reset & Default Gateway Recovery

Reset a Dell PowerSwitch OS10 back to factory defaults and bring the management default gateway back up, with backup, reset and verification steps.

admin admin 2026-10-02
0 0 0
Dell SmartFabric OS10 sFlow: Configuration and Analysis

Dell SmartFabric OS10 sFlow: Configuration and Analysis

Enable sFlow on Dell SmartFabric OS10: global and per-interface sampling, collector setup, sizing the sample rate and verifying the data.

admin admin 2026-10-01
0 0 0
Dell OS10 RESTCONF API: Automating Switch Config

Dell OS10 RESTCONF API: Automating Switch Config

Use the Dell SmartFabric OS10 RESTCONF API to read and push YANG-modelled configuration with curl or Python, including auth, verification and common e

admin admin 2026-09-24
0 0 0
1 2 3 4